Z-Skid

High quality dedicated to capping.

4/8 Head Capper with Twin Turret for Pharma – for 24 mm spray caps and overcaps at 7,200 bph.

5-Head Screw-on Capper for Pharma - application of 38 mm caps at 7,200 bph.

Capper for Pharma at 7,800 bph - featuring quick Bottle Handling Changeover.

10-Head capper combines application of inserting pumps with application of screw-on caps at 10,000 bph.

Single head roll-on sealing capper for wine

Single head capper featuring Snap-on and Screw-on cap application for Food.

Single head snap-on capper for beverage and distilled spirits.

Brushless single station FILLCAPP filler/capper - application of 22 mm screw-on caps at 2,400 bph for Pharma.

Single head brushless screw-on capper with electronic head slide - 1,500 bph - Personal Care.

Screw-on capper for Cosmetics.

Screw-on capper for Pharma with indexing cap feeder.

20 head DR-type decapper for CSD (Carbonated Soft Drinks)

4 Head Capper for Food (spices) at 7,200 bph – featuring Twin-Turret configuration on the same base.

ZC-Prism Closure Inspection & Rejection Module offering multiple detection capabilities to help increase line efficiencies.

Screw-on capper for Personal Care running shampoo containers with tall caps.

14 head DR decapper with inline bottle conveyor for beverages – removing metal Twist Off caps onto glass bottles at 24 000 bph.

11 head MS decapper with parallel bottle conveyor for CSD – removing plastic screw-on caps onto PET bottles at 30 000 bph.

2 head inline capper for coffee powder - screw-on capping of plastic caps onto glass jars at 3,600 bph.

20 head DR-type decapper for CSD (Carbonated Soft Drinks).

14-Head Roll-on sealing Capper for Beverage - for aluminum Roll On Pilfer Proof caps onto aluminum bottles at 24,000 bph.

Single-head capper for application of ROPP closures to glass or aluminum bottles.

Screw-on Capper Demo for Pharmaceutical Industry

14-Head Roll-on Capper for application of aluminum closures onto aluminum bottles.

Push-down Capper for the Food Industry

The TCT or Torque Calibration Tool is utilized to verify application torque delivered by the capping head magnetic clutch assembly. This video demonstrates full operation of the TCT

Roller Calibration Tool (RCT) has been developed to more accurately measure side loads that are critical in the setup of a sealing head for the application of Roll-on aluminum Pilfer Proof Closures.

Zalkin Life Cycle Management team members describe our aftermarket Parts Kits and Rebuild Program.

Virtual interface between the Zalkin service office and the customer provides remote assistance combining local & remote streams for interactive help sessions.